Worldwide control

Control your Danalock from everywhere

Home

Products

Guides

FAQ

About

Press

Warranties

Buy

You have two buttons

The green and red circle in the keychain is actually two buttons!

This means that if you want to lock your door using Danabridge, you have to press the red part of the circle or one of the colored keyholes - not the center.

Avoid stall

If you press the green keyhole and the lock is already unlocked, this will cause the Danalock to “stall” for a small amount of time.

Same thing happens if you try to remote lock the door, and the door is already locked.

Set up the Bridge device:

Setup the bridge device:

Download the free Danabridge app on a iPhone or an iPad on App Store.

Just search for Danabridge
and download the app.

Setup the bridge device:

When the download is complete the app icon will be located on the main screen on your iPhone or Ipad. Now your ready to set up your old iPhone or iPad as a Bridgedevice.

Setup the bridge device:

First you will be asked to login with your existing Danalock owner name and password.

Setup the bridge device:

When the Bridgedevice is connected to the Danalock the main status page opens up. Warnings will be displayed in red if the Wi-Fi connection is lost or if the Bridgedevice looses power:

At the bottom you can press an icon to configure the bridge settings or delete the Danabridge connection. Press configuration.

Setup the bridge device:

Name the Danabridge and press the arrow in the right corner at the bottom.

Setup the bridge device:

Now you see a list of the Danalocks you own. You can see if they are linked to this or another Danabridge device. Press the grey arrow next to the name of the lock you want to bridge control.

Setup the bridge device:

If the Danalock you wish to remote control is already linked to a Danabridge you just override it by pressing the Bridge symbol and confirming your choise.

Setup the bridge device:

If the Bridgedevice is too far away from the Danalock you will get this screen.

Press the arrow to the right at the bottom of the screen when you are in reach. That arrow is greyed out if the distance is too far.

Setup the bridge device:

Confirm your bridge by sliding
the sWhich to the right.

Press the arrow to the left of the screen bottom to go back to the list.

Setup the bridge device:

Now your Danalock is bridged.

Press the arrow on the right side at the bottom of the screen.

Setup the bridge device:

Leave the Danabridge app open on the iPhone or iPad.

Now you must send an access invitation to yourself or the user you wish to give access.

Go to your Danalock app:

Setup the bridge device:

All Danabridge access is generated via Lock user invitations. This means that you even have to invite yourself to the Danabridge.

Open the Danalock app and
press ”Lock users” in the bottom of the screen.

Danalock app

- invite yourself

Enable ”Give this user remote access using the Danalock bridge app” and send the invitation by Danalock user, SMS or email.

Danalock app

- invite yourself

In your Danalock app you will get a notification when you or the user has accepted the invitation.

Danalock app

- invite yourself

On your keychain the bridged Danalock is easily recognized by the red and green lock symbol.

Test the bridge:

Test the Danabridge remote control by sWhiching Bluetooth off on your smartphone with the Danalock app. Remember to have Wi-Fi enabled on both devices.

11 - 16

<

>

You can control several Danalocks with the Danabridge, as long as the Bridgedevice is within Bluetooth range of the Danalocks.

Gammel Stillingvej 427C, 8462 Harlev - DK +45 4242 8122 [email protected]

Danablog

Partner login

You have two buttons

The green and red circle in the keychain is actually two buttons!

This means that if you want to lock your door using Danabridge, you have to press the red part of the circle or one of the colored keyholes - not the center.

Avoid stall

If you press the green keyhole and the lock is already unlocked, this will cause the Danalock to “stall” for a small amount of time. Same thing happens if you try to remote lock the door, and the door is already locked.

You can control several Danalocks with the Danabridge, as long as the Bridgedevice is within Bluetooth range of the Danalocks.

Set up the Bridge device:

Home

Products

Guides

FAQ

Press

About

Warranties

Buy

You have two buttons

The green and red circle in the keychain is actually two buttons!

This means that if you want to lock your door using Danabridge, you have to press the red part of the circle or one of the colored keyholes - not the center.

Avoid stall

If you press the green keyhole and the lock is already unlocked, this will cause the Danalock to “stall” for a small amount of time. Same thing happens if you try to remote lock the door, and the door is already locked.

Gammel Stillingvej 427C, 8462 Harlev - DK

+45 4242 8122 [email protected]

Danablog

Partner login

Control your Danalock everywhere

You can control several Danalocks with the Danabridge, as long as the Bridgedevice is within Bluetooth range of the Danalocks.

Set up the Bridge device:

Setup the bridgedevice:

Download the free Danabridge app on a iPhone or an iPad on App Store.

Just search for Danabridge
and download the app.

Setup the bridgedevice:

When the download is complete the app icon will be located on the main screen on your iPhone or Ipad. Now your ready to set up your old iPhone or iPad as a Bridgedevice.

Setup the bridgedevice:

First you will be asked to login with your existing Danalock owner name and password.

Setup the bridgedevice:

When the Bridgedevice is connected to the Danalock the main status page opens up. Warnings will be displayed in red if the Wi-Fi connection is lost or if the Bridgedevice looses power:

At the bottom you can press an icon to configure the bridge settings or delete the Danabridge connection. Press configuration.

Setup the bridgedevice:

Name the Danabridge and press the arrow in the right corner at the bottom.

Setup the bridgedevice:

Now you see a list of the Danalocks you own. You can see if they are linked to this or another Danabridge device.

Press the grey arrow next to the name of the lock you want to bridge control.

Setup the bridgedevice:

If the Danalock you wish to remote control
is already linked to a Danabridge you just override it by pressing the Bridge symbol
and confirming your choise.

Setup the bridgedevice:

If the Bridgedevice is too far away from
the Danalock you will get this screen.

Press the arrow to the right at the bottom of the screen when you are in reach. That arrow is greyed out if the distance is too far.

Setup the bridgedevice:

Confirm your bridge by sliding
the sWhich to the right.

Press the arrow to the left of the screen bottom to go back to the list.

Setup the bridgedevice:

Now your Danalock is bridged.

Press the arrow on the right side at the bottom of the screen.

Setup the bridgedevice:

Leave the Danabridge app open
on the iPhone or iPad.

Now you send an access invitation
to yourself or the user you wish
should remote control the Danalock.

Go to your Danalock app:

Setup the bridgedevice:

All Danabridge access is generated via Lock user invitations. This means that you even have to invite yourself to the Danabridge.

Open the Danalock app and
press ”Lock users” in the bottom
of the screen.

Danalock app - invite yourself

Enable ”Give this user remote access using the Danalock bridge app” and send the invitation by Danalock user, SMS or email.

Danalock app - invite yourself

In your Danalock app you will get a notification when you or the user has accepted the invitation.

Danalock app - invite yourself

On your keychain the bridged Danalock is easily recognized by the red and green lock symbol.

Test the bridge:

Test the Danabridge remote control by sWhiching Bluetooth off on your smartphone with the Danalock app.

Remember to have Wi-Fi enabled
on both devices.

15 - 16

<

>

You have two buttons

The green and red circle in the keychain is actually two buttons!

This means that if you want to lock your door using Danabridge, you have to press the red part of the circle or one of the colored keyholes - not the center.

Avoid stall

If you press the green keyhole and the lock is already unlocked, this will cause the Danalock to “stall” for a small amount of time. Same thing happens if you try to remote lock the door, and the door is already locked.

You can control several Danalocks with the Danabridge, as long as the Bridgedevice is within Bluetooth range of the Danalocks.

Control your Danalock everywhere

Setup the bridgedevice:

Download the free Danabridge app on a iPhone or an iPad on App Store.

Just search for Danabridge
and download the app.

Setup the bridgedevice:

When the download is complete the app icon will be located on the main screen on your iPhone or Ipad. Now your ready to set up your old iPhone or iPad as a Bridgedevice.

Setup the bridgedevice:

First you will be asked to login with your existing Danalock owner name and password.

Setup the bridgedevice:

When the Bridgedevice is connected to the Danalock the main status page opens up. Warnings will be displayed in red if the Wi-Fi connection is lost or if power is lost:

At the bottom you can press an icon to configure the bridge settings or delete the connection. Press configuration.

Setup the bridgedevice:

Name the Danabridge and press the arrow in the right corner at the bottom.

Setup the bridgedevice:

Now you see a list of the Danalocks you own. You can see if they are linked to this or another Danabridge device. Press the grey arrow next to the name of the lock you want to bridge control.

Setup the bridgedevice:

If the Danalock you wish to remote control is already linked to a Danabridge you just override it by pressing the Bridge symbol and confirming your choise.

Setup the bridgedevice:

If the Bridgedevice is too far away from the Danalock you will get this screen.

Press the arrow to the right at the bottom of the screen when you are in reach. That arrow is greyed out if the distance is too far.

Setup the bridgedevice:

Confirm your bridge by sliding
the sWhich to the right.

Press the arrow to the left of the screen bottom to go back to the list.

Setup the bridgedevice:

Now your Danalock is bridged.

Press the arrow on the right side at the bottom of the screen.

Setup the bridgedevice:

Leave the Danabridge app open
on the iPhone or iPad.

Now you send an access invitation to yourself or the user you wish should remote control the Danalock.

Go to your Danalock app:

Setup the bridgedevice:

All Danabridge access is generated via Lock user invitations. This means that you even have to invite yourself.

Open the Danalock app and
press ”Lock users” in the bottom
of the screen.

Danalock app - invite yourself

Enable ”Give this user remote access using the Danalock bridge app” and send the invitation by Danalock user, SMS or email.

Danalock app - invite yourself

In your Danalock app you will get a notification when you or the user has accepted the invitation.

Danalock app - invite yourself

On your keychain the bridged Danalock is easily recognized by the red and green lock symbol.

Test the bridge:

Test the Danabridge remote control by sWhiching Bluetooth off on your smartphone with the Danalock app. Remember to have Wi-Fi enabled on both devices.

6 - 16

<

>

Set up the bridge device:

Home

Products

Guides

FAQ

Press

About

Warranties

Buy

Danablog

Partner login

You have two buttons

The green and red circle in the
keychain is actually two buttons!

This means that if you want to lock your door using Danabridge, you have to press the red part of the circle or one
of the colored keyholes - not the center.

Avoid stall

If you press the green keyhole and the lock is already unlocked, this will cause the Danalock to “stall” for a small amount of time. Same thing happens if you try to remote lock the door, and the door is already locked.

You can control several Danalocks with the Danabridge, as long as the Bridgedevice is within Bluetooth range of the Danalocks.

Setup the bridgedevice:

Download the free Danabridge app on a iPhone or an iPad on App Store.

Just search for Danabridge
and download the app.

Setup the bridgedevice:

When the download is complete the app icon will be located on the main screen on your iPhone or Ipad. Now your ready to set up your old iPhone or iPad as a Bridgedevice.

Setup the bridgedevice:

First you will be asked to login with your existing Danalock owner name and password.

Setup the bridgedevice:

When the Bridgedevice is connected to the Danalock the main status page opens up. Warnings will be displayed in red if the Wi-Fi connection is lost or if power is lost:

At the bottom you can press an icon to configure the bridge settings or delete the connection. Press configuration.

Setup the bridgedevice:

Name the Danabridge and press the arrow in the right corner at the bottom.

Setup the bridgedevice:

Now you see a list of the Danalocks you own. You can see if they are linked to this or another Danabridge device. Press the grey arrow next to the name of the lock you want to bridge control.

Setup the bridgedevice:

If the Danalock you wish to remote control is already linked to a Danabridge you just override it by pressing the Bridge symbol and confirming your choise.

Setup the bridgedevice:

If the Bridgedevice is too far away from the Danalock you will get this screen.

Press the arrow to the right at the bottom of the screen when you are in reach. That arrow is greyed out if the distance is too far.

Setup the bridgedevice:

Confirm your bridge by sliding
the sWhich to the right.

Press the arrow to the left of the screen bottom to go back to the list.

Setup the bridgedevice:

Now your Danalock is bridged.

Press the arrow on the right side at the bottom of the screen.

Setup the bridgedevice:

Leave the Danabridge app open
on the iPhone or iPad.

Now you send an access invitation to yourself or the user you wish should remote control the Danalock.

Go to your Danalock app:

Setup the bridgedevice:

All Danabridge access is generated via Lock user invitations. This means that you even have to invite yourself.

Open the Danalock app and
press ”Lock users” in the bottom
of the screen.

Danalock app - invite yourself

Enable ”Give this user remote access using the Danalock bridge app” and send the invitation by Danalock user, SMS or email.

Danalock app - invite yourself

In your Danalock app you will get a notification when you or the user has accepted the invitation.

Danalock app - invite yourself

On your keychain the bridged Danalock is easily recognized by the red and green lock symbol.

Test the bridge:

Test the Danabridge remote control by sWhiching Bluetooth off on your smartphone with the Danalock app. Remember to have Wi-Fi enabled on both devices.

6 - 16

<

>

Set up the Bridgedevice: